Skip to content

    How to Mount and True Diamond Wheels & CBN Wheels – Alredy in FAQs

    Updated: October 1, 2023 Published: February 11, 2015


    Flanges, plates and spindles should be clean, free of burrs and run true. Maximum run-out should not exceed .005” for straight type wheels or .001” for cup wheels.


    After mounting, Diamond wheels and CBN wheels should be trued with a brake truing device. When the wheel is trued, it will be glazed and must be dressed aggressively to expose the crystals.


    More from the blog

    View All Posts